底盤屬于汽車的重要組成部分，同時其所處的工作環境也比較惡劣，容易受到外部環境的侵害。所以，汽車底盤的維修及保養屬于一項比較棘手的問題。廠家在此建議降低汽車底盤檢測的誤差以提高修車精準性！

The chassis is an important part of the automobile. At the same time, its working environment is also relatively bad, and it is easy to be infringed by the external environment. Therefore, the repair and maintenance of automobile chassis is a thorny problem. The manufacturer hereby suggests to reduce the inspection error of automobile chassis to improve the accuracy of vehicle repair!

在汽車底盤維修過程中，我們必須正確且有效地檢測汽車底盤，才能判斷其屬于哪類汽車故障，從而對汽車底盤進行精準的維修和養護;而汽車底盤檢測容易會受到各種因素的影響，如功率吸收裝置、機械阻力以及安置角大小等因素都會影響到汽車底盤檢測的結果，進而影響到汽車維修的精準性。

In the process of automobile chassis maintenance, we must correctly and effectively detect the automobile chassis in order to judge what kind of automobile fault it belongs to, so as to carry out accurate maintenance and repair of the automobile chassis; However, automobile chassis inspection is easily affected by various factors, such as power absorption device, mechanical resistance and the size of placement angle, which will affect the results of automobile chassis inspection, and then affect the accuracy of automobile maintenance.

所以，維修員必須充分考慮各種因素對汽車底盤檢測所帶來的影響，才盡可能地降低檢測的誤差，終展開有效地汽車底盤維修工作。維修員可以從汽車的功率吸收裝置角度出發，考慮其可能對汽車檢測結果帶來的影響，并盡可能降低影響，從而縮小檢測的誤差。

Therefore, the maintainer must fully consider the impact of various factors on the vehicle chassis inspection, so as to reduce the inspection error as much as possible, and finally carry out the effective vehicle chassis maintenance work. From the perspective of the power absorption device of the vehicle, the maintainer can consider its possible impact on the vehicle detection results, and reduce the impact as far as possible, so as to reduce the detection error.

比如說，汽車的電渦流測功機連續工作的轉速越高，則會增大檢測結果的誤差。所以，在檢測過程中，需要將汽車加載裝置的持續工作時間、汽車大的吸收功率、冷卻汽車附件功率損耗的特性等因素考慮在內，才能降低檢測的誤差，從而提高檢測結果的準確性。

For example, the higher the continuous working speed of the automobile eddy current dynamometer, the greater the error of the test results. Therefore, in the detection process, it is necessary to take into account the continuous working time of the vehicle loading device, the large absorption power of the vehicle, the power loss characteristics of cooling vehicle accessories and other factors, so as to reduce the detection error and improve the accuracy of the detection results.

在汽車運行過程中，我們想要測出不同車速下的臺架機械損失，除了考慮到支承軸承、升速器以及聯軸器等結構運轉所產生的損失外，還需要注意機械阻力可能產生的檢測誤差。因為支承軸承與聯軸器旋轉中會產生一定的摩擦力，而摩擦力又會將一定的功率消耗掉，從而造成汽車底盤檢測的偏差。因此，我們也需要重視機械阻力對汽車底盤檢測所帶來的影響。

During the operation of the vehicle, we want to measure the mechanical loss of the bench at different speeds. In addition to considering the loss caused by the operation of supporting bearings, speed risers, couplings and other structures, we also need to pay attention to the possible detection error caused by mechanical resistance. Because there will be certain friction during the rotation of the support bearing and the coupling, and the friction will consume a certain amount of power, resulting in the deviation of the automobile chassis inspection. Therefore, we also need to pay attention to the impact of mechanical resistance on automobile chassis inspection.

對于不同的車輛類型，其汽車滾筒之間的安置角大小也會存在差異。但是，如果汽車滾筒之間的安置角比較小，會影響到汽車檢測的穩定性，而如果安置角變大的話，又會提高汽車驅動阻力;不利于科學判斷汽車底盤的狀態，進而影響到檢測結果的穩定性和精準性。所以，在檢測過程中，我們也應該將安置角大小考慮在內。

For different vehicle types, the size of the placement angle between the automobile rollers will also be different. However, if the setting angle between the automobile rollers is relatively small, it will affect the stability of automobile detection, and if the setting angle becomes larger, it will increase the driving resistance of the automobile; It is not conducive to the scientific judgment of the state of the automobile chassis, and then affects the stability and accuracy of the test results. Therefore, in the process of inspection, we should also take the size of the placement angle into account.

濟南沃爾沃汽車維修哪家好廠家提醒您，汽車底盤的保養應該注意時間的連貫性，對其展開定期的泥沙、化學附著物的清理，讓汽車底盤能夠長期保持一個干凈的工作環境。而在底盤清理過程中，我們可以從底盤的傳動系、行駛系、轉向系和制動系等幾個部位進行全方位的清潔，同時也要保障清潔的時間，不能只是簡單的清水清理，一定注意清潔的高頻率，這樣才能真正做到全方面的清洗。

Which good manufacturer of Jinan Volvo cars reminds you that the maintenance of the car chassis should pay attention to the consistency of time, and carry out regular cleaning of sediment and chemical attachments, so that the car chassis can maintain a clean working environment for a long time. In the process of chassis cleaning, we can clean the transmission system, driving system, steering system, braking system and other parts of the chassis in an all-round way. At the same time, we should also ensure the cleaning time. We should not only clean the chassis with clean water, but also pay attention to the high frequency of cleaning, so as to truly achieve all-round cleaning.

總之，汽車底盤的維修及保養關系到汽車的使用壽命和行使安全。所以，我們應該加強對底盤的維修及保養力度，并采用有效地方法來維護汽車底盤，從而保障汽車的行使安全。如對這一問題還存在任何疑問，都歡迎關注我們網站http://www.liangshuijing.cn并咨詢我們的工作人員，將竭誠為您服務。

In a word, the repair and maintenance of the automobile chassis is related to the service life and driving safety of the automobile. Therefore, we should strengthen the repair and maintenance of the chassis, and adopt effective local methods to maintain the vehicle chassis, so as to ensure the driving safety of the vehicle. If you have any questions about this issue, you are welcome to follow our website http://www.liangshuijing.cn And consult our staff, will serve you wholeheartedly.